Gauge Components

The Prosport Remote Oil Sender Install Kit is required when an oil pressure sender is too large to fit into and an OEM oil galley plug (Clearance Issues). The Prosport kit includes everything you need to mount any oil pressure sender with an 1/8" NPT...

Prosport offers an easy way to install senders for any foreign car. The kit comes with 5 different 1/8" NPT threaded center adapters. This Kit includes: M16x1.5, M14x1.5, M12x1.0, M10x1.0, 1/8"BSP.

The Prosport temperature sender can be used for water, engine oil and transmission oil. The sender features 1/8" NPT thread, 104°F=5830oHms, 194°F= 1268 oHms and 302°F=316 oHms . The sensor is made for the Prosport EVO and JDM Series gauges.

Made from 6061 Aluminum this in-line radiator hose adapter will make installing your temperature sender a breeze. This will place the temperature sensor directly in the stream of the water towards the radiator without absorbing transient heat from the...

Prosport's Dual Post Oil Pressure sender (VDO type) is 3-160 oHms, 0-10 BAR, 0-200 PSI and features 1/8" NPT thread.

Prosport developed this to fill the empty hole in a gauge pod or DIN panel if you do not have enough gauges or just can't decide which gauges to purchase. The outer raised bezel is finished in your choice of brushed aluminum or black and center is a...

The Prosport temperature sender can be used for water, engine oil and transmission oil. The sender features 1/8" NPT thread, 32-925 oHms and 68°F-302°F Range. The sensor is made for the Prosport Performance and Premium gauges that are 1 1/2" long front...

Made from 6061 Aluminum this in-line 30mm radiator hose adapter will make installing your temperature sender a breeze. This will place the temperature sensor directly in the stream of the water towards the radiator without absorbing transient heat from...

The Prosport gauge hood can be used on any 52mm gauge or used to angle your gauges when installed backwards. Keep in mind all Prosport gauges already comes with a hood.

Made from 6061 Aluminum this in-line radiator hose adapter will make installing your temperature sender a breeze. This will place the temperature sensor directly in the stream of the water towards the radiator without absorbing transient heat from the...

The Prosport plug replaces the stock Subaru EJ20 / EJ25 engine main oil galley plug with a threaded oil galley plug. The threads inside the plug will allow for fitment of 1/8" NPT Sender. Makes installation of Oil Pressure/Oil Temperature Senders easy by...

The Prosport 52mm gauge band strap holder (Mount & Clamp) can be placed anywhere on a dash, steering wheel column or A-pillar.

This is a great product to make installing your Oil Pressure Sender and Oil Temp. senders easier. This screws on under your oil filter and it has two 1/8"NPT fittings. So, no more drilling and taping holes. Just screw this adapter on and screw in our Oil...

The Prosport Oil / Fuel pressure sender is designed to work the Prosport Premium Series Oil Pressure and Fuel Pressure Gauges. The sender features: 0-5 Volt, 0-200 PSI and 1/8" NPT thread. *This sender cannot be used with Performance Series Gauges.

Killer B Oil Temperature Sensor Adapter OEM to 1/8NPT

Killer B Oil Temperature Sensor Adapter OEM to 1/8PT

Killer B Oil Temperature Sensor Adapter M18 PT

Killer B Oil Temperature Sensor Adapter M18 NPT

GReddy FR-S / BRZ Upper Water Temperature Adapter

Garrett Various Speed Sensor w/o Gauge (Pro) for G Series Models

Garrett Various Speed Sensor Kit (Street) for G Series Models

Garrett Various Speed Sensor w/o Gauge (Pro)

Garrett Various Speed Sensor Kit (Street)